]Phone: 1-800-448-7688; Fax: 1-804 - 798-4010 E-mail: asava "AT" mindspring(dot)com
Inside Sales: Pat Fitzgerald and Dave Lloyd; Outside Sales - Kenny Crump
"Novamerican Steel, through its 23 operating units within the Nova Steel Group and American Steel and Aluminum Corporation, offers a wide range of innovative steel service solutions on a just-in-time delivery basis. More precisely, we process and distribute carbon steel, stainless steel and aluminum products and operate as an intermediary between primary metal producers and manufacturers. In addition to flat-rolled processing and roll forming to customer specifications, Novamerican produces steel tubing used for a variety of markets. As a result, most of our customers fall into one of the following categories:
To meet the exacting standards of our customers, Novamerican operates in 12
different locations in Central Canada and 2 locations in the U.S. as a
flat-rolled service centre and manufacturer of tubing and specialized end
products, focusing on value-added processing to meet specific customer needs.
Our Canadian service centres and manufacturing locations service a broad base of
1,300 customers in Central Canada and the U.S. We also operate in nine locations
in the Northeastern and Mid-Atlantic United States as a distributor of carbon
steel, aluminum and stainless steel products, from which we provide local
service to a broad base of 7,500 U.S. customers. The strength of the Company's
customer base reflects our commitment to quality, reliability and service. Most
of Novamerican's customers are located within a 250-mile radius of one of our
facilities, allowing us to operate an efficient delivery system capable of
handling a high volume of short lead-time orders." [Parkway
Manufacturing and Machine Shop Home Page]
Phone: 757-487-1963; (800) 526-1024; in Virginia (800) 552-1510; Fax: 757- 487-3369; Inside Sales: Sherry Gee; Outside Sales - Michael Cronce Email: sales "AT" bmgmetals(dot)com
"Your metals superstore.
Serving Virginia and the mid-Atlantic region.
STEEL-ALUMINUM-STAINLESS-SHEETS-PLATES-BARS;
This site is featured on
BuilderNet - the premium Internet
based Interactive Catalog of building products for architects, engineers, and
contractors. BMG Metals supplies
carbon steel,
aluminum, as well as
stainless steel to a
diverse range of customers including machine shops, steel fabricators,
precasters, utilities, industrial plants, sheet metal shops and the construction
industry. For the large or small users, from one bar to a truck load." [Parkway Manufacturing
and Machine Shop Home Page]
Phone: 800-570-7674; Fax: 215-793-0919 Email: chapel "AT" chapelsteel(dot)com
Inside Sales: Mark Ermigotti
"A NEW VISION OF STEEL!
High Strength Steel: 130,000 MIN. YIELD PLATE, 100,000 MIN. YIELD
COIL/SHEET/FLAT BAR , ASTM A514 ( T-1) GRADE B/H/F/Q, ASTM A656 GRADE 60/70/80,
ASTM A572 GRADE 50/60/65, ASTM A715 GRADE 50/60/70/80, ASTM 607 GRADE 50/60/65,
ASTM A36. Abrasion Resistant Steel:
AR200/AR235/AR360/AR400/AR500, AR400F/AR500F,AR400 MILL ROLLED FLAT BARS, T-1 (
321-340-360 BHN ), .40/.50 CARBON, MANGANESE ( 11-14 %), NITRONIC 30,
CHROMIUM CARBIDE OVERLAY. Corrosion Resistant Steel: ASTM
A588/ASTM A242 , ASTM A606 . Marine and Offshore Steel: ABS A/B,
ABS AH36/DH36/EH36, API 2HGR50/2WGR50, A633 GRADE C. Pressure Vessel
Steel: SA 516 GRADE 60/70 (As Rolled, Normalized, HIC Quality), SA
387 GRADE 11/22/5 CLASS 1 AND 2, SA 537 CLASS 1, SA 283/285 GRADE C, SA 204
GRADE B/C." [Parkway
Manufacturing and Machine Shop Home Page]
Phone: 757-628-0139; (800) 476-4562; Fax: 757-628-0130 Email: steelsales "AT" globe-iron(dot)com
Inside Sales: Bryan and Melissa; Outside Sales - Pete Manugo
"...Providing diverse fabricated
structural and miscellaneous steel for industrial structures, office buildings,
schools, hospitals, shopping centers, specialty fabrications and
government/military facilities, etc. Located by one of the East Coast's busiest
ports, we have excellent export capabilities. Our 350,000 square foot
facility, which includes a fabrication plant, a complete steel product
warehouse, a blast cleaning/painting shop and a delivery fleet that are capable
of handling your project of any size. We are AISC certified category III-B for
the following: Complex and Conventional Steel Structures; Simple and Major Steel
Bridges; Sophisticated Paint Endorsement. We can cut it, bend it, roll it,
drill, fabricate, blast, paint and deliver it ! Beams, channels, angles,
plates, flat bars, pipe, tube, grating, expanded metal, floor plates, rebar,
I-beams, rods" [Parkway
Manufacturing and Machine Shop Home Page]
Phone: 800-435-0850; Fax: 804-957-5800, Email: va "AT" infra-metals(dot)com
Inside Sales: Pat Watson
"Infra-Metals Co. is one of the
largest Structural Steel Service centers in the eastern United States. A leading
distributor of structural steel products with strategic locations along the east
coast extending from Connecticut into Florida and the Caribbean. Through our
parent company, TUI AG, a leading international company, we are provided with
secure financing and a strong commitment to steel distribution and processing.
Infra-Metals offers its customers a broad array of products
and services. Each location is expressly tailored to meet the
specific needs of the market that it serves. In general each division has a
commitment to: prompt delivery, saw cutting, beam splitting, cambering,
punching, and plate burning. Our inventory is extensive in both breadth
and depth, and we often stock sections unavailable from most other service
centers. Infra-Metals is constantly in the market purchasing steel and enjoys a
strong relationship with all major vendors both in the U.S. and globally.
Channel, floor plate, I-beams, merchant bar, pipe, plate, rebar, tubing, wide
flange, cambering, plate burning, saw cutting, t-splitting." [Parkway
Manufacturing and Machine Shop Home Page]
Phone: 800-338-8855; Fax 804-222-0037 Email: questions "AT" ryersontull(dot)com
Inside Sales: John Davis; Outside Sales - Kevin
"Ryerson Tull is North America's
leading distributor and processor of metals. The company has a network of
service centers across the United States and in Canada. It also has
investments in service center operations is Mexico and Asia, and maintains metal
trading capabilities around the world. Inventories of more than 100,000
items of carbon, alloy and stainless steel; aluminum, copper alloys; and
industrial plastics. The company's network
of service centers across North America, its broad product line and diverse
customer experience create a true "one-stop shopping" for its
customers." [Parkway
Manufacturing and Machine Shop Home Page]
Phone: 800-325-2479; 800-231-3502; 315-336-9022; Fax: 315-336-1057; Email email "AT" aasteel(dot)com
Inside Sales: Frank Carzo; Outside Sales - Vincent Rota
"A
leading distributor in the Steel Service Center Industry, supplying Pressure
Vessel and other quality steel plate and bar products, many kinds of which are
not commonly stocked elsewhere. We daily assist Engineers, Contractors, Pressure
Vessel Fabricators, and Equipment Manufacturers in the Petroleum, Petro-Chemical,
Process Equipment, Mining, Offshore and Marine Construction, and Power
Generation industries on a world-wide basis who require professional product
knowledge, top-rated service and guaranteed quality assurance from their
supplier on a 24 hours per day basis. One of America's and the world's
leading Steel Plate Distributors and Steel Plate Service Centers. We supply
worldwide a wide variety of quality alloy and carbon steel plate, precision
flame cut steel plate shapes and patterns, and steel round bar to customers for
use in steel fabrication and manufacturing in the petrochemical refining,
process plant, power generation, pressure vessel fabrication, heat exchanger
manufacturing, mining equipment fabrication, marine offshore construction and
machined metal parts industries." [Parkway
Manufacturing and Machine Shop Home Page]
"Designing
things for a better millennium...Providing structural engineering
design and consulting services for both the public and private sectors
specializing in waterfront engineering services which includes design of new or
repair to existing wharves, piers, docks and bulkheads as well as heavy
industrial structures such as material handlers, warehouses, crane rail
foundations and fuel storage and handling facilities. Wharves & Piers,
Bulkheads, Industrial Structures, Municipal Buildings, Bridges, Airfield Fuel
Systems, Warehouses. Dennis B. Clark, P.E.
is a firm principal and project manager as well as a structural
engineer. Mr. Clark is a certified underwater diver
and a certified bridge inspector.."
[Parkway
Manufacturing and Machine Shop Home Page]
Phone: 800-388-7430; 314-851-9200; Fax: 314-851-9336 Email: sales "AT" tubularsteel(dot)com
Inside Sales: Barbara Cillo
"Cold Drawn and As-Welded Tubing: Cold Drawn features various heat treatments and honing; As-Welded features high strength to 50,000 yield and aluminum killed drawing quality. Hot Finished Seamless Carbon / Alloy features low-temp charpy material, high temp grades, and can be miter-cut. Square and Rectangular Tubing features hard-to-find-sizes and miter cutting. Seamless, Welded Pipe DSAW and CW; features 1/8" to 48", high strength to 52,000 yield, pipe to A869 chemistry for fittings conversion, low carbon pipe for low temp/charpy applications, variety of surface and end finishes, wheelabrating and sandblasting, and heavy walls. Stainless Steel Products, including welded and seamless pipe 1/2" to 24" O.D. in Schedules 5s through XXH; welded and seamless tube 1/4" to 12", .020" wall and greater; pump shaft quality bar (PSQ) rough turned, smooth turned, or bar available up to 16". Tumble and wire brush deburring, sandblasting, painting, powder coating, zinc electroplating, laser cutting, centerless grinding, honing, and wheelabrating. Square cut up to 25" O.D., simple and compound miter band saw cutting up to 45 degrees and 18" O.D., band saw cutting through 25", high speed cold saw cutting up to 3 1/2" O.D. tubing ."
[Parkway Manufacturing and Machine Shop Home Page]
Phone: 800-333-4140; Fax: 419-471-2655; Email: sales "AT" metricmetal(dot)com
Inside Sales: Dick Dail
"Parker
Steel stocks only metric sized metals in cold drawn rounds, hexagons, squares,
and flats, TG&P shafting, chrome plated shafting, tubing in seamless and
welded diameters, welded square and rectangular tubing, threaded rod, cold and
hot rolled sheets and plates, shims, tees, angles, channels, beams, re-bars, and
drill rod; all in millimeter sizes. We stock metric sizes in carbon steel,
alloy, stainless steel, brass, and aluminum. Cold drawn rounds, threaded rod,
hexagons, cold and hot-rolled sheets and plates, squares, flats, shims, TGP
shafting, tees, chrome plated shafting, angles, seamless round tubing, channels,
welded square and rectangular tubing, beams, drill rod. Certification
and Test Reports Furnished Upon Request." [Parkway
Manufacturing and Machine Shop Home Page]
"At Teka everything evolves around mixing. For
decades, TEKA Maschinenbau GmbH, headquartered in Edenkoben, Germany, has
offered innovative mixing technology solutions primarily for the concrete and
glass industries. Since the company was established in 1961, TEKA has
proven to be a problem-solver for many customers worldwide. Emphasis is
placed on the various types of mixers and on individual plant designs for
the concrete manufacturing industry. Regardless if pan-type, planetary or
twin-shaft mixer, TEKA not only offers the right type of
mixer for each specific application, but also the corresponding tailor-made
mixing plant. Further priority in TEKA's diverse program is the special
mixing technology for the glass industry. Subsidiaries exist in France, Spain,
Poland und the United States. In addition, representatives exist in many
countries worldwide." [Parkway
Manufacturing and Machine Shop Home Page]
"Our sales staff is made up of architects and engineers not trained
professional salesmen. Southern Material Handling has satisfied customers all
across Virginia, in North Carolina, California, Italy and Korea.
Headquartered in Richmond, VA. Sales staff includes: Phil
Smith; Richmond Office; 10 years
Architectural Project Manager, 25 years Material Handling Sales. Leif
Berner; Hampton Roads Office; Mechanical
Engineer; 5 years Gear Box Design and Engineering Management, 3 years
Material Handling Applications. Joe Jones; Central
Virginia Office, Richmond, VA; Phone: (804)730-3114; Fax: (804)730-6421; 22
years Material Handling, Loading Dock & Industrial High Speed Door Sales and
Applications. Products: Air Casters, Air Curtains, Bins, CNC
Carts & Computer cabinets, Dock Equipment, Engineered Systems, Ergonomics,
Heat Exchangers, In-Plant Buildings, Lift Tables, Lubricants, Modular Storage
Systems, Personnel Carriers, and Protective products." [Parkway
Manufacturing and Machine Shop Home Page]