Parkway Manufacturing Facilities, Products, and Capabilities

Facility

Machines & Machinery

Processes

Return to Home Page

Parkway Manufacturing Company, Inc.

707 Industry Drive 

Hampton, VA - 23661

Phone - (757) 896-9712

Parkway Manufacturing Machine Shop is a Member of the Better Business Bureau BBB. Click the logo for company information.

List of Parkway Manufacturing Facilities
Parkway Manufacturing Products and Capabilities
Abrasion Resistant Wear Plates (AR235, AR400, AR500)
Machinery Foundations
 

List of Parkway Manufacturing Facilities

Plant & Office

Assembly & Heavy Fabricating: 6,400 sq. ft.

Machining & Small Fabricating: 3,600 sq. ft.

Office & Engineering: 720 sq. ft.

Cutting
 
(1) ESAB 48" x 60" Oxy-Fuel Torch Cutter
(1) Track Torch w/ radius attachment
(2) Hand Operated Plasma Cutters
(1) Koike Aronson Oxy-Fuel/ Plasma Cutter 72" x 120"
      
   
 
  Welding
Turning  
(1) LeBlond 30" x 75" Engine Lathe
(5) Airco 500 amp Stick Welders
(1) LeBlond 19" x 60" Engine Lathe
(5) Hobart 500 amp Mig Welders
(1) Clausing 14" x 36" Engine Lathe
(1) Miller 650 amp Mig Welder
  (1) Hobart 400 amp Short Arc Welder
  (1) Airco 200 amp TIG welder - Water cooled Torch
Milling (1) Aluminum Mig Welder
 
(1) Sharp 10" x 51" Vertical Mill
(1) Sharp 9"x 48" Vertical Mill
Material Handling
(1) Bridgeport 9" x 42" Vertical Mill
 
Both with DRO
(1) Gorton 2-30 with DRO

(1) Hyster 15,000# forklift

 

(1) Datsun 7000# forklift

 

(1) Clark 3000# forklift

(1) Toyota 300# Forklift

Grinding

(1) Yale 7000# forklift

 

(1) 10 ton gantry crane in large shop

(1) Thompson 7" x 20" Hydraulic Surface Grinder

(1) 1/2 ton Jib crane in large shop

 

(2) 1 ton monorail cranes in small shop

 

(1) 12 ft. International Flat Bed

Drilling

(1) 20ft International Flat Bed

   
(1) Johanson Center Pivot Radial Drill, #5 MT

(1) Johanson Center Pivot Radial Drill, #4 MT

 
(1) Cincinnati Gilbert Radial Drill, #5 MT  
(1) Clausing Drill Press, #3 MT

(1) Fosdick Radila Drill with tilt table

 

Staff
 
  (9) Production employees
Rolling/Cutting/Punching (3) Office personnel
 
(1) 1/2"x 48" Niagara Drop End Plate Roll  
(1) Buffalo No 1/2 Iron Worker  
(1) 12ga "x 42" Pneumatic Shear Other
 
Sawing Welding to AWS D1.1 & MIL-248
  In house QA procedure
(1) Kasto 12" Power Hack AutoCAD 14+ Mechanical Drafting
(1) Racine 10" Power Hack  
(1) DoAll 26" Vertical Saw updated 07/16/2011

Return to Facilities and Capabilities Page Index
 

Parkway Manufacturing Products and Capabilities

Abrasion Resistant Wear Plates

Our wear plates are custom manufactured to your drawing or sample part. We stock and manufacture AR235, AR400F & AR500 Abrasion Resistant Steels. We stock both 3/8" and 5/8" thick plates in both grades. Our torch and plasma cutting is CNC controlled. This enables us to keep your plate configuration available for use again and provide the identical product every time. For chute and mixer wall plates we can custom roll up to 1/2" thick x 48" wide.

Our engineering department can plan your part from a faxed sketch or an emailed AutoCAD file. We can work with .dwg or.dxf drawings. If an approval drawing is needed we can provide that as well.

We currently provide shipping throughout the United States, Canada & Mexico. We can use your preferred carrier or ours. We can ship prepaid and add to your invoice or ship collect.

Please take the time to fax or email a sketch or drawing. We will provide a prompt estimate including delivery costs and dates. Our fax number is - 757-896-9714; Our email is - info "at" Parkwaymfg "dot" com. (We can handle email receipt of very large AutoCAD files.)

Return to Facilities and Capabilities Page Index

********************************

Machinery Foundations

We manufacture machinery foundations, both simple and complex, to your drawings.

Some of the simple foundations can be made from a sketch or description. An example is "Pump Mounting Plate" 2.25" finish thickness, 24" square with a centered clearance hole 16" in diameter. Include four anchor holes, one on each corner, 7/8" in diameter. Include four pump mounting holes, centered on the sides, 5/8"-11 tapped through. One face must be machined flat within 0.010" The mounting holes are set in 1-1/2" from each side and the pump mounting holes are on a 18" bolt circle. A simple faxed sketch will insure a correct part.

We can fax back an approval drawing if needed.

A complex drawing can be emailed in AutoCAD .dwg or .dxf format. We manufacture complex fabrications using structural quality ASTM A-36 and ASTM A-500 material. Our welding is to ASTM D1.1 We can provide a certificate if needed. We also can provide typical material certs if needed. Our Machinery Division fabricators are experienced in maintaining most flatness and dimensional requirements.

We can provide pricing and delivery quotes for fabrication only or complete parts.

Please take the time to fax or email a sketch or drawing. We will provide a prompt estimate including delivery costs and dates. Our fax number is - 757-896-9714; Our email is - info"at"Parkwaymfg"dot"com.  (We can handle email receipt of very large AutoCAD files.)

Return to Facilities and Capabilities Page Index

 

 Visitors   Hit Counter  (Since Jan 2004)

Parkway Manufacturing, Inc.

707 Industry Drive

 Hampton, Virginia - 23661

Owner:  Walter Schultz

Manager: Barbara Mastej

Phone - (757) 896-9712

Examples of some of our services include: 

Heavy Steel Manufacturing and Sub-contract Manufacturing.

Motor Lanterns, Machinery Foundations, "C" Face Motor Adapters.

Brackets, Braces, Supports, Adapters

Functional & Decorative  Architectural & Ornamental "Wrought Iron" Design and Installation.

Porch, Deck & Stair Railings.

Precision and General Machining.

Contract Torch and Plasma Arc Cutting.

Field welding and repair services.

Machine Rebuilding

Dock leveler installation.

Miscellaneous structural manufacturing. 

HVAC Equipment Supports, Mezzanine, Cat Walks, Access Stairs

Manufacturing and installation of protective Bollards and curb guards.

Manufacturing and installation of Truck Racks, Ladder Racks & Custom Truck Beds

Manufacturing and sales of Bicycle Racks, Plant Stands, Fireplace Log Racks, "Wrought Iron" Picnic Table Frames

Examples of some of our Processes include: 

CAD/CAM Computer-controlled Gantry Flame and Plasma Cutting

Lathe work (Turning, Facing Boring and threading)

Milling Work (Face, side and end milling)

Drill press work, Precision and Radial

Welding, MIG, Tig and Shielded Metal Arc (SMAW or "Stick") Welding

Sheet metal shearing and bending. Both Box & Pan and Press Brake work

Plate rolling

AR Steel Fabricating (Abrasion Resistant Steel)

Saw Cutting

CNC Torch & Plasma cutting

Custom Design

Electrical, Hydraulic and Mechanical Assembly

On Site welding and repair 

We have many other special needs services which we can provide.  Just ask, by calling or sending an email.

Return to Home Page

Top of this page
 

Parkway Manufacturing, Precision Fabrication and Machine shop is located in Hampton Virginia (VA) and serves all of Southeast Virginia and Northeast North Carolina, including: All of Tidewater VA, Virginia Beach Va. Norfolk Va. Chesapeake Va. Newport News Va. Portsmouth Va. Hampton Va. Yorktown Va.  Suffolk Va. Williamsburg Va. Richmond, Va. Elizabeth City NC, and Jacksonville NC. (North Carolina)

As well as all of North America, (USA & Canada)

If you would like to contact our Web Designer

( http://www.parkwaymfg.com http://www.twosteptidewater.com http://www.willharper.com http://www.hyperlearn.com http://www.unityren.com http://www.niman-meyers.com http://www.gtechnetworks.com )

 

This page was last changed on - 09/23/2017